Parking Brake: Adjustment

Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf) 

1. Pull the parking brake lever to the fully applied position, and count the number of clicks.

   Parking brake lever travel: 6 to 9 clicks at 196 N (20 kgf, 44 lbf) 

1. Remove the console box hole cover.
2. Remove the console box carpet.
3. Remove the console box assy rear.
4. Remove the lock nut.
5. Turn the wire adjusting nut No.1 until the lever travel is correct.
6. Tighten the lock nut.

   Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf) 

   Fig 1: Identifying Parking Brake Lever

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002