Problem Symptoms Table

HINT:

Proceed to the troubleshooting for each circuit in the table below.

PROBLEM SYMPTOMS DETAILS

Symptom	Suspected Area	Reference
When the ignition switch is in the ON position, the SRS warning light sometimes comes on after approximately 6 seconds.	SRS warning light circuit malfunction (Always lights up, when DTC is not output).	SRS WARNING LIGHT CIRCUIT MALFUNCTION (ALWAYS LIGHT UP, WHEN DTC IS NOT OUTPUT)
SRS warning light always comes on even when DTC is not output.
With the ignition switch is in the ON position, the SRS warning light does not come on.	SRS warning light circuit malfunction (Does not light up, when ignition switch is turned to the ON position).	SRS WARNING LIGHT CIRCUIT MALFUNCTION (DOES NOT LIGHT UP, WHEN IGNITION SWITCH IS TURNED TO ON)
SRS warning light comes on normally but the DTC and normal system code are not displayed.	TC Terminal circuit	TC TERMINAL CIRCUIT
The terminals TC and CG are not connected but the DTC and normal system code are displayed.	TC Terminal circuit	TC TERMINAL CIRCUIT