LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2004 >> xA Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 370 (2004 - Gauges & Instrument Panels - Coupe/Sedan) >> Instrument Panel Assembly >> Removal and Installation >> Removal >> (J) Console Boot (M/T Models)

(J) Console Boot (M/T Models)

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a thin flat-bladed screwdriver wrapped with tape from behind console boot, and remove metal clip on back. Then pull up and back to disengage from front metal clip.
  2. Disconnect hazard switch harness connector, and remove console boot.