(I) Console Finisher (A/T Models)

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

Put selector lever in drive position.
Remove metal clips from rear of console finisher, then remove metal clips at front. Pull console finisher upward to disengage from console.
CAUTION: Guide pin inserted into A/T device guide can be easily broken. Be careful when removing it.
Disconnect harness connectors, and remove console finisher.
After removing, remove each parts from console finisher. Refer to "CENTER CONSOLE (A/T MODELS) ".

Fig 1: Center Console (A/T Models)
Courtesy of NISSAN MOTOR CO., U.S.A.