Conditions for Running the DTC: P2A00
WARNING: This page is about a different variant/trim than selected.
- DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
- The Engine Run Time parameter is more than 100 seconds.
- The Engine speed parameter is between 1,000-3,400 RPM.
- The Ignition 1 Signal parameter is between 10-18 volts.
- The Mass Airflow (MAF) Sensor parameter is between 10-30 g/s.
- The ECT Sensor parameter is more than 70°C (158°F).
- DTC P2A00 runs continuously when the above conditions are met for 5 seconds.