P0138 Rich Test Enable
WARNING: This page is about a different variant/trim than selected.
- DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
- The Loop Status parameter is Closed.
- The Ignition 1 Signal parameter is between 10-18 volts.
- The Fuel Level Sensor parameter is more than 10 percent.
- The TP Sensor parameter is between 0-50 percent.
- DTC P0138 runs the rich test continuously when the above conditions are met for 2 seconds.