LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.4L - Repair Instructions - On Vehicle) >> Intake Manifold Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Intake Manifold Cover
    GM1694521Courtesy of GENERAL MOTORS CORP.
  1. Place the intake manifold cover onto the engine over the studs.
  2. Push down on the intake manifold cover directly over the rear stud in order to engage the cover to the stud.
  3. Push down on the intake manifold cover directly over the front right stud in order to engage the cover to the stud.
  4. Push down on the intake manifold cover directly over the front left stud in order to engage the cover to the stud.
scientia non olet · About LEMON Manuals