LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.4L - Repair Instructions - On Vehicle) >> Engine Oil Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Engine Oil Pressure Sensor
    GM630350Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the engine oil pressure sensor and tighten to 22 N.m (16 lb ft).
  2. Fig 2: Identifying CKP & Oil Pressure Sensor Electrical Connectors
    GM1589842Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine oil pressure sensor electrical connector (2).
  4. Lower the vehicle.