Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
- Remove the right engine mount upper nut.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the right engine mount lower nut.
- Loosen the transmission mount nuts.
- Remove the left engine mount lower nut.
- Remove the right brake hose bracket bolt.
- Remove the right brake line clip at the crossmember.
- Position an adjustable jack below the oil pan. Place a block of wood between the oil pan and the jack.
- Raise the engine using the adjustable jack until the engine mount can be removed.
- Remove the right engine mount.