Intermediate and Overdrive Clutch Housing Retaining Ring Specifications
WARNING: This page is about a different variant/trim than selected.
| Dimention M | Retainer Ring Thickness (mm) | Retainer Ring Thickness (in) |
|---|---|---|
| 0.85 mm -0.95 mm (0.033 in - 0.037 in) | 3.80-3.90 | 0.149-0.153 |
| 0.95 mm -1.05 mm (0.037 in - 0.041 in) | 3.70-3.80 | 0.145-0.149 |
| 1.05 mm -1.15 mm (0.041 in - 0.045 in) | 3.60-3.70 | 0.141-0.145 |
| 1.15 mm -1.25 mm (0.045 in - 0.049 in) | 3.50-3.60 | 0.137-0.141 |