Engine Identification (LAP, LAT, LE5, LE8, LE9)

Fig 1: Locating Broadcast Code Label & Partial VIN

Courtesy of GENERAL MOTORS CORP.

Identification can be made through the use of the Broadcast Code label on the engine front cover (1) and the use of the partial VIN etched in one of two places - the primary location is on the starter motor flange (3). The secondary location is the oil filter bowl (2).

Fig 2: Identifying Identification Tag Information
Courtesy of GENERAL MOTORS CORP.
• Barcode (1)
• Sequence Number (2)
• Day (3)
• Month (4)
• Year (5)
• Engine Assembly Plant (6)
• Broadcast Code (7)
• Part Designation (8)
• Engine Assembly Number (9)
• Broadcast Code (10)

The partial VIN identifies the specific vehicle by sequence number.