Manual Shift Auxiliary Position Switch Replacement - Steering Wheel

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Manual Shift Auxiliary Position Switch & Screw

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement . Remove the steering wheel control switches. Refer to Steering Wheel Control Switch Assembly Replacement .
1	Manual Shift Position Switch Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Procedure: Remove the manual shift position switch screws. Tighten: 3.5 N.m (31 lb in)
2	Manual Shift Position Switch (Qty: 2) Procedure: Disconnect the electrical connectors from the from the switches.

Callout

Component Name

Preliminary Procedures

Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement .
Remove the steering wheel control switches. Refer to Steering Wheel Control Switch Assembly Replacement .

Manual Shift Position Switch Screw (Qty: 4)

CAUTION: Refer to Fastener Caution .

Procedure:
Remove the manual shift position switch screws.

Tighten: 3.5 N.m (31 lb in)

Manual Shift Position Switch (Qty: 2)
Procedure:
Disconnect the electrical connectors from the from the switches.