LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 2.4L - Repair Instructions - Off Vehicle (1 Of 2)) >> Engine Flywheel Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View of Engine Flywheel
    GM2148522Courtesy of GENERAL MOTORS CORP.
  1. Install EN 43653:  holding tool (1) to prevent crankshaft rotation.
    2. Fig 2: Identifying Flywheel & Retaining Bolts
    GM412117Courtesy of GENERAL MOTORS CORP.
  2. Remove the flywheel attaching bolts.
  3. Remove the flywheel, if the vehicle has a manual transmission.
    4. Fig 3: View Of Flywheel
    GM412119Courtesy of GENERAL MOTORS CORP.
  4. Remove the flywheel retainer for vehicles with automatic transmission.
  5. Remove the flywheel, if the vehicle has an automatic transmission.
  6. Clean the thread adhesive from the flywheel bolt holes. Use a nylon bristle brush to clean the holes in the crankshaft.
  7. Remove EN 43653:  holding tool.
scientia non olet · About LEMON Manuals