LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Fuel Tank Filler Evaporative Emission Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying EVAP Line Quick Connect Fitting
    GM1765565Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel fill pipe. Refer to Fuel Tank Filler Pipe Replacement .
  2. Disconnect the fuel tank fill evaporative emission (EVAP) pipe quick connect fitting (1) at the fuel pump module. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Remove the fuel tank fill EVAP pipe.
scientia non olet · About LEMON Manuals