LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Fuel Tank Filler Evaporative Emission Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying EVAP Line Quick Connect Fitting
    GM1765565Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank fill EVAP pipe.
  2. Connect the fuel tank fill EVAP pipe quick connect fitting (1) to the fuel pump module. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the fuel fill pipe. Refer to Fuel Tank Filler Pipe Replacement .
scientia non olet · About LEMON Manuals