Fuel Pressure Relief (Without CH 48027-100): Notes
WARNING: This page is about a different variant/trim than selected.
WARNING:
Refer to Gasoline/Gasoline Vapors Warning
.
WARNING:
Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of personal injury. After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel injection pump, or the connections. In order to reduce the risk of personal injury, cover the fuel system components with a shop towel before disconnection. This will catch any fuel that may leak out. Place the towel in an approved container when the disconnection is complete.