LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of CMP Sensor & ECT Sensor Electrical Connectors
    GM1591858Courtesy of GENERAL MOTORS CORP.
  1. Partially drain the cooling system. Refer to Cooling System Draining and Filling (GE-47716) or Cooling System Draining and Filling (2.4L LE5) or Cooling System Draining and Filling (Static Fill-LNF) .
  2. Disconnect the engine wiring harness electrical connector (6) from the engine coolant temperature (ECT) sensor.
    3. Fig 2: Identifying ECT Sensor
    GM1713085Courtesy of GENERAL MOTORS CORP.
  3. Remove the ECT.
scientia non olet · About LEMON Manuals