Inaccurate Shift Points
WARNING: This page is about a different variant/trim than selected.
| Check | Causes |
|---|---|
| DEFINITION: An upshift or a downshift, or TCC apply, that occurs at a speed outside of the calibrated range. Refer to Shift Speed . | |
| Fluid Pump Assembly |
|
| Control Valve Body Accumulator Assembly | Spacer plate and gasket misaligned or damaged |
| Throttle Position Sensor | Disconnected or damaged |
| Input Speed Sensor |
|
| Output Speed Sensor |
|
| Shift Solenoids | Leaking |
| Sport Mode active | Shorted switch or circuit |