Rear Window Wiper Arm Replacement

Rear Window Wiper Arm Replacement

Special Tools

J 39637 /KM-6626 Wiper Arm Puller

Removal Procedure





Remove the wiper arm.

* Open the cover.
* Remove the nut.
* Pull off the wiper arm using J 39637 /KM-6626.

Installation Procedure

Install the rear wiper arm.

* Extend the wiper arm.

Caution: Refer to Fastener Caution (Fastener Caution).

* Align the wiper arm parallel to the bottom edge of the liftgate window.

Tighten the nut to 9 Nm (80 lb in).

* Close the cover.