Brake Pad: Testing and Inspection

Brake Pad Inspection




Warning: Refer to Brake Dust Warning (Brake Dust Warning).

1. Remove brake linings. Refer to Front Disc Brake Pads Replacement (Front Disc Brake Pads Replacement) or Rear Disc Brake Pads Replacement (Rear Disc Brake Pads Replacement).
2. Measure the remaining brake lining thickness with a caliper (1).
3. Nominal values. Refer to Disc Brake Component Specifications (Disc Brake Component Specifications).
4. Install brake pads.
5. Install the brake linings. Refer to Front Disc Brake Pads Replacement (Front Disc Brake Pads Replacement) or Rear Disc Brake Pads Replacement (Rear Disc Brake Pads Replacement).