Steering Column Upper Trim Cover Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement . |
|
| 1 | Steering Column Upper Trim Cover Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 2 | Steering Column Upper Trim Cover Tip: The steering column upper trim cover consists of both the cover AND the I/P cluster trim plate bezel. Do not try and separate these pieces or damage to the plastic heat staking WILL occur. |