Instrument Panel Accessory Bezel Replacement (without U61)

Fig 1: Instrument Panel Accessory Bezel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the radio front speaker grill. Refer to Radio Front Speaker Grille Replacement .
1	Instrument Panel Accessory Bezel Screws (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 3 N.m (26 lb in)
2	Instrument Panel Accessory Bezel Assembly Procedure Use a flat-bladed plastic trim tool in order to release the accessory bezel from the instrument panel. Disconnect the electrical connectors. When replacing the accessory bezel, transfer all necessary components.
3	Retainer Clip (Qty: 8)