Driver Knee Bolster Reinforcement Replacement

Fig 1: Driver Knee Bolster Reinforcement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the knee bolster assembly. Refer to Driver Knee Bolster Replacement .
1	Knee Bolster Reinforcement Upper Bolts (Qty: 2) NOTE: Refer to Fastener Notice in Cautions and Notices. Tighten: 20 N.m (15 lb ft)
2	Knee Bolster Reinforcement Lower Bolts (Qty: 2) Tighten: 20 N.m (15 lb ft)
3	Knee Bolster Reinforcement Assembly