Fuel Gage

The instrument panel cluster (IPC) displays the fuel level based on information from the engine control module (ECM). The engine control module (ECM) calculates the fuel level based on information from the fuel level sensor. The engine control module (ECM) sends the fuel level information to the body control module (BCM) via the serial data circuit. The instrument panel cluster (IPC) displays the fuel level as received from the BCM. The fuel gage defaults to E (empty) if:

• The ECM detects a malfunction in the fuel level sensor circuit.
• The IPC detects a loss of serial data communications with the BCM.
• The BCM detects a loss of serial data communications with the ECM.

When the fuel level is less than a pre-determined value, the Low Fuel indicator message illuminates.