LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Sky Red Line, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Forward & Coast Clutch Disassemble >> Disassembly Procedure

Disassembly Procedure

    Fig 1: View Of Forward Clutch Apply Plates
    GM801880Courtesy of GENERAL MOTORS CORP.
  1. Remove the forward clutch backing plate retainer ring (451).
  2. Remove the forward clutch backing plate (450).
  3. Remove the forward clutch plates (448, 449). Refer to Clutch Plate Selection Specifications .
  4. Remove the forward apply plate (447).
    5. Fig 2: Identifying Coast Clutch Apply Components
    GM801881Courtesy of GENERAL MOTORS CORP.
  5. Remove the coast clutch housing (446).
  6. Remove the coast backing plate (445).
  7. Remove the coast clutch plates (443, 444). Refer to Clutch Plate Selection Specifications .
  8. Remove the coast apply plate (442).
  9. Remove the coast clutch spacer plate (441).
    10. Fig 3: Compressing Coast Clutch Piston Spring With J 43074
    GM801882Courtesy of GENERAL MOTORS CORP.
  10. Use the J 43074  to compress the forward and coast clutch spring (439).
  11. Remove the retainer ring (440).
  12. Remove J 43074  .
  13. Remove the clutch spring (439).
    14. Fig 4: Locating Forward & Coast Clutch Piston
    GM801884Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: It may be necessary to apply air pressure to remove the piston.
  14. Remove the coast clutch piston (438).
  15. Remove the forward clutch piston (436).
    16. Fig 5: Identifying Input Shaft Fluid Seals
    GM801886Courtesy of GENERAL MOTORS CORP.
  16. Remove the input shaft fluid seal (431).
  17. Remove the input shaft fluid seals (432).
scientia non olet · About LEMON Manuals