LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Sky Base, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Shift Control Linkage Replacement >> Removal Procedure

Removal Procedure

  1. Position the shift lever in PARK.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the front closeout panel. Refer to Floor Panel Tunnel Panel Replacement - Front (Automatic Transmission) or Floor Panel Tunnel Panel Replacement - Front (Manual Transmission) .
    4. Fig 1: View Of Shift Control Assembly & Linkage
    GM1612912Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the shift control linkage (2) from the shift control assembly (1).
    5. Fig 2: View Of Shift Control Linkage & Manual Shift Shaft Nut
    GM1612916Courtesy of GENERAL MOTORS CORP.
  5. Remove the manual shift shaft nut (1).
  6. Remove the shift control linkage (2) from the vehicle.
scientia non olet · About LEMON Manuals