LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Sky Base, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E/5L50-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Input Speed Sensor Installation

Input Speed Sensor Installation

    Fig 1: Locating Input Speed Sensor & Bolt
    GM801806Courtesy of GENERAL MOTORS CORP.
  1. Rotate the transmission 90 degrees.
  2. Install the input speed sensor (44) into the case.
  3. NOTE: Refer to Fastener Notice .
  4. Install the input speed sensor bolt (45) into the case.

    Tighten:  Tighten the input speed sensor bolt (45) to 11 N.m ( 8 lb ft).