Back Flush Procedure

Fig 1: View Of J 45096 & J 35944-440

Courtesy of GENERAL MOTORS CORP.

Connect the J 45096 adapters (1) to the vehicle's transmission oil cooler supply and return lines at the transmission using J 45806 (2).

Fig 2: Identifying Black Supply Hose & Clear Waste Hose

Courtesy of GENERAL MOTORS CORP.

Connect the black supply hose (1) to the return line, top connector of the transmission, and the clear waste hose (2) to the feed line, bottom connector of the transmission, to the vehicle cooler lines. This is the reverse flow - backflush direction.

Fig 3: View Of Main Function Switch FLUSH Position

Courtesy of GENERAL MOTORS CORP.

Turn the main function switch to the FLUSH position. Allow the machine to operate for 30 seconds.

Fig 4: View Of Main Function Switch IDLE Position

Courtesy of GENERAL MOTORS CORP.

Turn the main function switch to the IDLE position and allow the supply vessel pressure to dissipate.