LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> VUE FWD L4-2.2L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Rear Window Upper Molding Replacement

Rear Window Upper Molding Replacement



Rear Window Upper Molding Replacement

Removal Procedure





1. Open the liftgate.
2. Gently pull on the molding to disengage the clips.
3. Remove the molding.



Installation Procedure





1. Position the molding to the vehicle.
2. Snap the molding into place at the clip locations.
3. Close the liftgate.
4. Replace the seat over the trim edge.


scientia non olet · About LEMON Manuals