Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Control Arm Nut *	220 N.m	162 lb ft
Rear Axle Tie Rod Bolt at Axle	125 N.m	92 lb ft
Rear Axle Tie Rod Bolt at Body	135 N.m	100 lb ft
Shock Absorber Bolts	85 N.m	63 lb ft
Wheel Bearing/Hub Bolts (New Only)	80 N.m	59 lb ft
* This is a prevailing torque type fastener. This fastener may be reused ONLY if: The fastener and its counterpart are clean and free from rust. The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating. Refer to the appropriate service procedure for the prevailing torque value. If the fastener does not meet these criteria, REPLACE the fastener.