LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> RELAY FWD V6-3.9L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Intake Manifold >> Service and Repair >> Intake Manifold Cover Replacement

Intake Manifold Cover Replacement



Intake Manifold Cover Replacement

Removal Procedure




1. Remove the engine oil fill cap.
2. Remove the oil fill pipe.
3. Pull up on the cover in order to disengage the cover from the studs.

Installation Procedure




1. Align the cover to the studs on the engine, push down on the cover above the studs in order to engage the cover to the studs.
2. Install the oil fill pipe.
3. Install the engine oil fill cap.

scientia non olet · About LEMON Manuals