LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> RELAY AWD V6-3.9L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Shift Solenoid >> Service and Repair >> 2-3 Shift Solenoid Valve Replacement

2-3 Shift Solenoid Valve Replacement



2-3 Shift Solenoid Valve Replacement

Removal Procedure

1. Remove the case side cover.
2. Disconnect the transaxle wiring harness.
3. Using a small screwdriver or pick, remove the 2-3 shift solenoid valve retainer (314C) from the control valve body (301).




4. Remove the 2-3 shift solenoid (315B).
5. remove the O-ring seal (316) from the 2-3 shift solenoid valve (315B) ONLY if it is damaged.

Installation Procedure

1. Install a new O-ring seal (316) onto the 2-3 shift solenoid valve (315B) if the O-ring was removed.




2. Install the 2-3 shift solenoid (315B).
3. Install the 2-3 shift solenoid valve retainer (314C) into the control valve body (301).
4. Connect the transaxle wiring harness.
5. Install the case side cover.

scientia non olet · About LEMON Manuals