Air Cleaner Inlet Duct Replacement

Air Cleaner Inlet Duct Replacement

Removal Procedure




1. Loosen the 2 intake air duct clamps (1) from air cleaner housing (2) and the throttle body.
2. Remove the air cleaner intake duct from the air cleaner housing and throttle bottle.

Installation Procedure




1. Install the air cleaner intake duct to the air cleaner housing (2) and the throttle bottle.

Notice: Refer to Fastener Notice.

2. Tighten the 2 intake air duct clamps (1).

Tighten the clamps to 2 N.m (18 lb in).