LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> RELAY AWD V6-3.9L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair

Idler Pulley: Service and Repair



Drive Belt Idler Pulley Replacement

Removal Procedure




1. Remove the drive belt.
2. Remove the required drive belt idler pulley bolt.
3. Remove the drive belt idler pulley.

Installation Procedure




1. Install the drive belt idler pulley.

Notice: Refer to Fastener Notice.

2. Install the required drive belt idler pulley bolt.

Tighten the bolt to 50 N.m (37 lb ft).

3. Install the drive belt.

scientia non olet · About LEMON Manuals