Stabilizer Shaft Link Replacement

Fig 1: Stabilizer Shaft Link Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) or Tire and Wheel Removal and Installation (5 Lug Wheel) .
1	Front Stabilizer Shaft Link Nut (Qty: 2) Tighten: 110 N.m (81 lb ft)
2	Front Stabilizer Shaft Link Tip: Remove the stabilizer link from the strut and stabilizer shaft.

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Front Stabilizer Shaft Link Nut (Qty: 2)

Tighten: 110 N.m (81 lb ft)

Front Stabilizer Shaft Link
Tip: Remove the stabilizer link from the strut and stabilizer shaft.