LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> ION L4-2.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - M/T >> Clutch Pedal Position Sensor / Switch >> Service and Repair >> Clutch Pedal Engine Start Switch Replacement

Clutch Pedal Engine Start Switch Replacement



Clutch Pedal Engine Start Switch Replacement

Removal Procedure

1. Remove the clutch pedal position switch (2) from the clutch pedal.




2. Remove the electrical connector (1) from the clutch pedal position switch (2).

Installation Procedure

1. Install the electrical connector (1) to the clutch pedal position switch (2).




2. Install the clutch pedal position switch to the clutch pedal.
3. Push the clutch pedal all the way to the floor to adjust the switch.

scientia non olet · About LEMON Manuals