LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Instrument Panel Cluster
    GM891893Courtesy of GENERAL MOTORS CORP.
  1. Connect the I/P cluster harness.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the I/P cluster in the I/P housing. Install and tighten the fasteners.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

  3. Install the I/P cluster trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 .
  5. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals