Removal Procedure

Fig 1: View Of Knee Bolster (Filler Panel) & Screws

GM939650

Courtesy of GENERAL MOTORS CORP.

Remove the screws from the steering column filler panel.
Remove the filler panel by pulling until the trim clips disengage.

Fig 2: Removing Left I/P Outer Trim Cover

GM987577

Courtesy of GENERAL MOTORS CORP.

Remove the outer trim panel by pulling on the panel.

Fig 3: Disconnecting/Connecting Electrical Connector

GM987568

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector from the door jamb switch.
Remove the right outer trim panel.