Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0068, P0106, P0107, P0108, P0112, P0113, P0117, P0118, P0120, P0122, P0123, P0125, P0128, P0130, P0131, P0132, P0133, P0134, P0135, P0171, P0172, P0220, P0315, P0326, P0327, P0336, P0502, P0507, P0601, P0602, P0604, P0606, P0641, P0651, P0700, P1133, P1134, P1516, P1621, P1680, P1681, P2101, P2120, P2125, P2135, P2138, P2176 are not set.
The engine speed is between 450-6,400 RPM (M/T).
The engine speed is between 450-6,100 RPM (auto).
The ignition voltage is between 9-18 volts.
The engine coolant temperature (ECT) is between -7 and +130°C (+20 and +254°F).
The engine has been running more than 5 seconds.
The fuel level is more than 10 percent.
DTC P0301, P0302, P0303, and P0304 run continuously when then above conditions are met.