Action Taken When the DTC Sets

WARNING: This page is about a different variant/trim than selected.

The TCM does not request the engine control module (ECM) to illuminate the malfunction indicator lamp (MIL).
The TCM disregards the stop lamp switch input for TCC scheduling. The TCM then uses throttle position and vehicle speed inputs to determine TCC application and release. Use of these inputs may result in a noticeable harsh apply or abrupt release of the TCC.
The TCM records the operating conditions when the Conditions for Setting the DTC are met. The TCM stores this information as Failure Records.
The TCM stores DTC P0719 in TCM history.