Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

No MAP DTCs P0107 or P0108.
No TP DTCs P0122 or P0123.
No ISS DTC P0717.
No VSS DTCs P0722 or P0723.
No 1-2 SS valve DTC P0752.
No 1-2 SS electrical DTCs P0973 or P0974.
The engine is running for 5 seconds and not in fuel cut-off.
The TP angle is greater than 8 percent.
The vehicle speed is greater than 16 km/h (10 mph).
The engine torque is greater than 50 N.m (37 lb ft).
The input shaft speed is greater than 1,050 RPM for 2 seconds.
An increase in input shaft speed of 500 RPM or greater has not occurred for 2 seconds.