Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0068, P0107, P0108, P0117, P0118, P0120, P0122, P0123, P0125, P0128, P0130, P0131, P0132, P0133, P0134, P0135, P0171, P0172, P0201, P0202, P0203, P0204, P0220, P0222, P0223, P0300, P0301, P0302, P0303, P0304, P0336, P0340, P0341, P0442, P0446, P0452, P0453, P0455, P0496, P0502, P0506, P0507, P1133, P1134, P1516, P1680, P1681, P1682, P2101, P2119, P2120, P2122, P2123, P2125, P2127, P2128, P2135, P2138, or P2176 are not set.
The engine run time is more than 60 seconds.
The change in engine speed is less than 50 RPM.
The engine speed is between 600-6,200 RPM.
The change in throttle angle is less than 2 percent.
The torque converter clutch (TCC) is stable to within 1.3 percent.
DTC P0106 runs continuously when the above conditions are met.