LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Torque Converter, Turbine Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. Refer to Transmission Replacement .
    2. Fig 1: View Of Torque Converter Assembly & O-Ring Seal
    GM104552Courtesy of GENERAL MOTORS CORP.
  2. Remove the torque convertor assembly from the transmission.
  3. Remove the torque convertor O-ring seal from the end of the turbine shaft. Use a screwdriver.
scientia non olet · About LEMON Manuals