LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Side Cover Axle Seal Installation >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 41102  Axle Seal Installer

    Fig 1: Installing Seal
    GM1644751Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: You must use the J 41102  in order to install the seal correctly. The J 41102  installs the axle seal to a given depth.
  1. Install a new side cover axle seal (2) into the side cover. Use the J 41102  .
  2. In order to prevent damage to the shaft splines during vehicle operation, add Polyurea grease (part number 7843867) to the splines on the output shaft.
scientia non olet · About LEMON Manuals