LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Second Clutch Plate Installation

Second Clutch Plate Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying 2nd Clutch Plates
    GM474260Courtesy of GENERAL MOTORS CORP.
  1. Inspect the 2nd clutch plates for excessive wear.
  2. Clean and dry each of the components.
  3. Assemble the 2nd clutch backing plate (99) with the flat side facing up.
  4. Assemble the three steel (97) and the three new fiber plates (98) in alternating order beginning with a fiber plate (98).
  5. Assemble the 2nd clutch wave plate (96).