LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Reaction Carrier Pinion Clearance Check

Reaction Carrier Pinion Clearance Check

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Measuring Reaction Carrier Pinion Clearance
    GM20282Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Replace the carrier assembly if the pinion gear clearance is out of specification. The pinion gears are permanently assembled to the carrier and are not serviced individually.
  1. Measure the reaction carrier pinion gear end play for proper clearance. Use a feeler gauge. The clearance is 0.24-0.69 mm (0.01-0.027 in).
  2. Clean and dry each of the components.
scientia non olet · About LEMON Manuals