LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Low/Reverse Servo Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil feed pipes. Refer to Oil Feed Pipes Replacement 
    2. Fig 1: View Of Low/Reverse Servo Assembly
    GM588858Courtesy of GENERAL MOTORS CORP.
  2. Remove the 3 low and reverse band servo cover bolts, the servo and the spring.
  3. Disassemble, clean and inspect the low and reverse servo assembly. Refer to Low and Reverse Servo Disassemble  in Automatic Transaxle 4T40-E/4T45-E-Unit Repair.
scientia non olet · About LEMON Manuals