LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Final Drive Internal Gear Removal

Final Drive Internal Gear Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: View Of Fretting Ring
GM20208Courtesy of GENERAL MOTORS CORP.
IMPORTANT: Note orientation of the internal gear before removal. It must be installed in the same orientation as it was assembled to prevent possible final drive noise.
IMPORTANT: The fretting ring (119) is in the case ring groove. Do not remove the fretting ring unless it appears damaged.

Remove the final drive internal gear (118).

scientia non olet · About LEMON Manuals