Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the front transmission mount through bolt.
- Remove the rear transmission mount through bolt.
- Lower the vehicle.
- Remove the battery tray. Refer to Exhaust Manifold Pipe Replacement (L66) or Exhaust Manifold Pipe Replacement (L61) in Engine Electrical.
- Support the powertrain assembly using a floor jack with a 2x6 inch block of wood.
- Remove the right engine mount to mount bracket bolts.
- Remove the left transmission mount to transmission bolts.
- Lower the engine in order to gain clearance to for mount removal.
- Remove the left transmission mount to side rail bolts.
- Remove the transmission mount from the side rail.