Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Using the J 36346 or equivalent, disconnect the shift cable ends from the transaxle by prying on both sides with even pressure.
- Disconnect the shift cables from the shift cable bracket. Discard the shift cable retaining clips.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the wheel.
- Remove the left inner splash shield.
- Shift the transmission into NEUTRAL.
- Remove the shifter guide bolt.
- Remove the shifter retaining bolts.
- Remove the shifter.